X10 MT10, Owner'S Manual

MT10E_08/97

13

Suspending the wake up function

If you set channel 1 for an ON time of 7:00 AM and number 1 is your bedside lamp, at
7:00 AM every day, your bedside lamp and internal will turn on.  If you turn the Buzzer
switch off on Friday nights the buzzer will not wake you up the next morning but your
bedside lamp will still turn on.

To suspend program for channel 1 turn the Buzzer switch off AND place the mode
switch in the “Set Clock” position. The ON program for BOTH the Alarm buzzer AND the
bedside lamp will be suspended.

You can control Modules instantly with the Mode switch in the “Set Clock” position, just
as you can when it is the RUN position, but remember to place the Mode switch back to
RUN and put the Buzzer switch back to the ON position on Sunday night to resume the
wake-up program for weekdays.

Note: Pressing the ON rocker key for Module number 1 (or 5) with the Mode switch in
the RUN position or Set Clock position does not activate the internal buzzer.  This
buzzer only sounds at preset times.

Alarm settings