2 3
2 3
2 3
2 3
2 3
2 2
2 2
2 2
2 2
2 2
W
W
W
W
W
ARRANTY
ARRANTY
ARRANTY
ARRANTY
ARRANTY
12 MONTH LIMITED W
12 MONTH LIMITED W
12 MONTH LIMITED W
12 MONTH LIMITED W
12 MONTH LIMITED WARRANTY
ARRANTY
ARRANTY
ARRANTY
ARRANTY
X10.com, a division of X10 Wireless
Technology, Inc. (X10) warrants X10 products
to be free from defective material and
workmanship for a period of one (1) year
from the original date of purchase at retail.
X10 agrees to repair or replace, at its sole
discretion, a defective X10 product if returned
to X10 within the warranty period and with
proof of purchase.
If service is required
under this warranty:
Call 1-800-442-5065, visit www.x10.com,
or e-mail support@x10.com.
For help or more information on
setup, please visit:
http://www.x10.com/support
TTTTT
ROUBLESHOOTING
ROUBLESHOOTING
ROUBLESHOOTING
ROUBLESHOOTING
ROUBLESHOOTING
The Transceiver Module doesn’t
respond to the remote:
• Check the House Code on the
Transceiver Module is set to ‘A.’ If you
have changed the House Code on
the remote (see p. 16), check that it
matches the House Code on the
module.
• Make sure the X10 button is set to
code 999, see page 19.
• Press the ON/OFF button on the
front of the Transceiver to confirm it
operates the item connected to it.
The Transceiver Module works, but
other modules don’t respond:
• Check that the Module has the same
House Code as the Transceiver
Module.
• Try plugging the Module into a
different outlet.
Note: if you use an RF Transceiver (such
as the RR501 or TM751) to control X10
Modules, you will be able to control up to
16 Modules. With a Transceiver, when
you press 1-6-ON you turn on Module
number 16. However, if you use an
IR543, when you press 1-6-ON you turn
on Modules 1 AND 6. The IR543 can
only control 10 Modules (1-9 plus
0=10).
The Remote won’t control your A/V
equipment, or doesn’t work at all:
• Use manual controls or the original
remote control to confirm the
equipment is working properly.
• Be sure you pressed the device key for
the device you want to control.
• Reenter the code for your A/V product
from the code listings on the separate
sheet included.
• Try searching for codes as described
on page 13.
• Replace the Remote’s batteries.
