17
16
U
SING
AUX
TO
CONTROL
A
S
ECOND
TV, VCR, C
ABLE
B
OX
OR
S
ATELLITE
R
ECEIVER
The AUX button is normally used to
control an audio component such as a CD
player, but it can also be configured to
control a second TV, VCR, cable box or
satellite receiver.
2.
Press and hold
SETUP until the
LED indicator lights
steadily. Release
Setup button.
1.
Turn on the device
you want to control.
3.
Press the AUX
button.
4.
Enter the 3 digit
Code from the
Library Code Tables.
The LED turns off
after the last digit
entered.
5.
Point the remote at
your A/V component
and press the
POWER button.
Your A/V
component should
turn off.
S
ETTING
UP
FOR
TV, VCR,
C
ABLE
, CD,
AND
S
ATELLITE
R
ECEIVER
5.
Point the remote at
the device and press
the POWER button.
Your device should
turn off.
1.
Turn on the device
you want to control
(TV, VCR, cable
box, etc.).
4.
Enter the 3 digit
Code from the
Library Code Tables.
The LED turns off
after the last digit
entered.
6.
Turn your device on
and press CH +. If
the device responds,
setup is complete.
2.
Press and hold
SETUP until the
LED indicator lights
steadily. Release the
SETUP button.
3.
Press and release
the mode button*
that matches the
device you want to
control. The LED
blinks once.
Use
AUX for CDs.
6.
Turn your A/V
component on and
press CH +. If it
responds, setup is
complete.
* You can store any code (TV, VCR, CBL,
SAT, CD etc.) under any mode except TV.
