STEP 1
Before installation, please verify that your CPU platform is indeed
socket 2011. Remove the fan(s) from the CPU cooler before installation.
INSTALLATION MANUAL
5
3. Installation guide for Intel LGA 2011 only
INSTALLATION MANUAL
6
6. WARRANTY, SERVICE AND SUPPORT
WARRANTY
Under normal operation, X2 provides 24 months warranty from the date of purchase. If you have
any technical problems, please contact your local vendor or contact us, preferably by e-mail.
We will offer you full technical support to solve the issue.
Please clearly indicate the model, serial number and date of purchase.
Inproper use will void warranty.
SERVICE AND SUPPORT
If you are in need of assistance or if you have any questions, please contact us through the contact
form on our website:
www.x2products.com/contact
For urgent matters we advise you to call our headquarters, located in the Netherlands:
TEL: 0031 (0)495 596511
STEP 3
Place a small needle drop of the supplied thermal grease onto
the CPU cooler baseor the CPU heat spreader and spread it out.
Do not use the whole supplied tube, this will be too much
and result in a lower cooling performance.
N
STEP 6
Install the fans onto the heatsink, connect the
Y-splitter cable to the fans and plug it into the mainboard CPU
cooler header. Please read your mainboard manual to locate the
correct CPU cooler fan header.
P
STEP 2
Fasten the LGA 2011 screw stem onto the mainboard.
K
STEP 4
Place the heatsink onto the CPU and insert the placed screw
stem into the heatsink mounting bracket.
K
STEP 5
Fasten the supplied Socket 2011 screws onto the stem and
tighten them. A rule of thumb is that you don’t need to tighten
too fast. On and solid secured is enough.
K
L
