U
SER
M
ANUAL
X
ORAYA
S
UITE
93
DiagXCP > Filter:
1 Show all signals
7 Export signals
2 Search box
8 Display XCP main settings
3 Refresh signal list
9 Add polling channel*
4 Display selected signals
10 Status of the signal definition file
5 Clear selected signals
11 Prescaler*
6 Import signals
12 Change column order
* Only if supported by the A2L file
Select signals for the DAQ measurement mode:
Select the check box of the signal (row) for the event channel (column).
or
Highlight one or multiple rows and right-click to activate these signals
simultaneously for one event channel.
Select signals for the polling measurement mode:
Click
Add polling channel
(9)
.
The button is inactive if the A2L file does not support polling.
In the row of the signal, select the polling cycle from the drop-down
list.
Filter signal list:
Enter the term or partial term in the search box
(2)
and click
Refresh
signal list
(3)
.
or
Click
Display selected signals
(4)
to only display signals with selected
check boxes or selected polling cycle.
Clear signal list filter:
Click
Show all signals
(1)
.
