16
• Avoid exposing cables to excessive heat or cold.
• If the mains cable or another cable connected to the product
is damaged, it must be replaced by the manufacturer or a
similarly qualified person (e.g. a qualified electrician).
• For safety reasons always take the plug out of the socket in the
event of a thunderstorm.
• Take the plug out of the socket during installation and
cleaning, and when the product is not in use.
ConneCtIon and Start-up
The plug in is used as a disconnecting device and always
has to be ready for operation. Connect the plug in with the
provided socket on the TV-Simulator. Afterwards plug it into a
mains socket at home. You can now choose between following
functions by using the slide switch on the upper side of the
device:
• “oFF” the device is permanently turned off.
• “oN” the device is permanently turned on. This function is
recommended if you want to use a clock timer for manually
regulated operation. This way, the device can also be used at
daytime or by chance.
• “Däm4 Stunden” The control lamp shines blue. The
device turns itself on at dusk and simulates a TV-programm for
4 hours. As soon as the environment brightness falls under the
threshold of the sensor the next day, the device will turn on
again repeatedly.
• “Däm8 Stunden” The control lamp shines red.
The function is the same as mentioned in “Däm4
Stunden” but the device will turn itself on for 8 hours.
