14
or redemption! LED -strips are – like all illuminants – consumable articles.
NOTICE:
Please note that when shortening the LED-strip, it is no longer
protected from dust or water at this point. Close it again, e.g. with neutral
silicone, to restore the original protection.
» Connect the LED strips with the connectors or connector cables. The last
installed LED strips won‘t have a connection on one side. Take care that the
arrows on the connection cables always remain on the same level as seen on
page 24, fig. 2.
» Connect the USB cable with an USB socket at your TV or screen.
» Your TV backlight is now ready for use.
» Switch on your TV or screen to activate the LED strips.
» Switch off your TV or screen to deactivate the LED strips.
Using the remote control
» Remove the protection foil from the battery compartment before first use.
» To insert new batteries, open up the battery compartment on the backside of
the remote control.
» Remove the old battery.
» Put in a new CR2025 button cell and take care the positive pole is pointing to
the upside.
» Close the battery compartment.
DANGER!
High risk for children and other groups of people! Keep batteries and rechar-
