24
25
The X4-TECH CD player CD-1000 is for play back of audio CDs at home.
The low-level audio output signal must be transferred to an external amplifier. The appliance
should not be connected directly to loudspeakers.
The device can only play audio CDs marked „COMPACT DISC DIGITAL AUDIO“. Do not attempt to
play any other kind of disc.
This product is only approved for the connection to 230 V~/50 Hz alternating current.
It can only be used in closed rooms, and therefore not outdoors. Contact with moisture, such as
in bathrooms, must be avoided.
Any use other than that described above could lead to damage to this product and involves the
risk of short circuits, fire, electric shock, etc.
The product must not be modified or converted, and the casing must not be opened.
Take note of all the safety instructions in these operating instructions!
Explanation of symbols
The lightening symbol in a triangle warns you against unprotected live components
or elements inside the housing or „live“ connection points. Coming into contact with
these components or connection points may be fatal.
Cables connected to such connection points may only be connected by an expert or
you have to use ready to connect cables.
The device contains no parts that should be serviced by the user. Therefore, do not
open the device.
The exclamation mark symbol on the device indicates that the user should read these
operating instructions prior to using the product.
1
Intended use
In the case of damages which are caused due to failure to observe these operating
instructions, the guarantee will expire. We do not assume any liability for any da-
mage arising as a consequence!
Nor do we assume liability for damage to property or personal injury, caused by
improper use or failure to observe the safety instructions. In such cases the gua-
rantee will lapse!
Dear customer, the safety instructions and danger warnings below are not only for the pro-
tection of the device but also to protect your well being. Please read carefully through the
following points:
› For safety and licensing (CE) reasons, unauthorised conversion and/or modifications
to the product are not permitted.
› All persons operating, installing, setting up, commissioning or servicing this device
must be trained and qualified correspondingly and observe these operating instruc-
tions.
› The device is designed according to protection class II. As a power source, only a pro-
per power socket (230 V~/50 Hz) connected the public mains system may be used.
› This product is equipped with a laser (class 1). Never open the device! A laser label is
affixed to the device to caution the users. Do not remove the warning sign from the
appliance. Do not open up the appliance or attempt to reach any interior components.
Never look directly into the laser beam. Laser radiation can seriously damage your
eyes.
› The device must be set up correctly. Please also follow these operating instructions.
› Make sure the mains cable is not squashed, bent, damaged through sharp edges or
otherwise subjected to mechanical strain. Avoid excess thermal stress on the mains
cable through excess heat or cold. Do not modify the mains cable. This may dama-
ge the mains cable. A damaged power cord can result in a life-threatening electric
shock.
› If the device or its connection cable is damaged, do not touch it. First of all, de-en-
ergize the corresponding mains socket (e.g. via the respective circuit-breaker) and
Chapter 2
Safety instructions
Chapter 1
Intended use
2
Safety instructions
Class 1 Laser
