8
9
When selecting the installation site, consider the room conditions, meaning the location of the
next outlet, etc. Also prevent direct sunlight, vibrations, dust, heat, cold and dampness. Keep the
appliance away from strong transformers or motors.
The device should be operated only on a stable, level surface. There must be enough
space for air circulation to permit dissipation of the generated heat. Therefore, only
place the device on a level surface and not on carpets, etc. Do not cover up the ven-
tilation slots in the casing.
If you do not heed these instructions, the device may be damaged.
Do not drill extra holes or screw any extra screws for mounting purposes into the
case. This will damage the device.
Make sure you position the appliance in a safe and stabile place, away from objects
that might fall on it, thereby avoiding unwanted accidents.
Because of the variety of used lacquers and polishes for furniture, the device base might leave
residues on furniture due to a chemical reaction. That‘s why do not place the device without
appropriate protection on the valuable furniture surfaces.
Setup
Chapter 4
Connection
Chapter 3
Setup
Before connecting the device, ensure that the mains plug is disconnected. Similarly,
all other devices to be connected should be disconnected from the electricity sup-
ply.
Ensure that connections are made the correct way round, that is, left to left and right to right.
Connecting the cinch outputs and the remote control cable
For the connection of the cinch sockets only use the shielded cinch wires. The use
of other cables might cause interference. To avoid distortion or mismatching which
could damage the device, cinch sockets may only be used to connected devices
which also have cinch connections.
To connect the remote control depot, use only the cables included.
The white cinch socket is connected with the left cinch socket of the amplifier.
The red cinch socket is connected with the right cinch socket of the amplifier.
4
Connection
E Q
TA PE
TU NER
C
E
R
Y
A
L
P
R
E
N
U
T
D
C
O
N
O
H
P
TA P E
P L A Y
R E C
E Q
C D
L
R
REMOT E SYSTEM
_
A U D I O
L
RI G H T
L E F T
_
AV 1
A V 2
L
R
IN T E G R A T ED C IR C U I T
A C 22 0V - 23 0V ~ 50H z
S P E A K E R S 6 ~ 8
GND
EQ
EQUALIZER
INTEGRATED CIRCUIT
AC 220-230V~50Hz
POWER CONSUMPTION: 10W
