Warning:
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
Warning:
If the device, 8006L1-1CR, is used without the detachable privacy shield, the
following criteria needs to be met by the Installed Environment of the PED for complying
with the PCI privacy screen design requirement:
A. Positioning of the PED on the check-stand in such way as to make visual observation of
the PIN-entry process infeasible.
0.
Visual shields designed into the check-stand.
1.
Position the PED so that it is angled in such a way to make PIN spying difficult.
B. Pop-up (temporary) privacy shield attached to the PED mounting stand. Consumer
(through education & prompting) or merchant would put the shield in place during
PIN entry.
C. Installing PED on an adjustable stand that allows consumers to swivel the terminal
sideways and/or tilt it forwards/backwards to a position that makes visual
observation of the PIN-entry process difficult.
D. Positioning of in-store security cameras such that the PIN-entry keypad is not visible.
Instructing the cardholder regarding safe PIN-entry, done with a combination of:
Signage on the PED.
Prompts on the display, possibly with a "click-through" screen.
Potentially literature at the point of sale.
A logo for safe PIN-entry process.
Table A1: Matrix of Observation Corridors and PIN Protection Method
Observation Corridors
Method Cashier
Customers
in Queue
Customers
Elsewhere
On-Site
Cameras
Remote
Cameras
PED Stand A
M
H
L
L
L
PED Stand B
H
H
H
L
M
Check-Stand A
L
M
M
L
H
Check-Stand B
H
H
M
H
H
Customer Instruction
H*
H*
H*
H*
H*
Customer Instruction methods are less repeatable and therefore should be used in combination with
other methods. L = low, M = medium, H = high.
The above information is the exclusive intellectual property of XAC Automation Corporation and shall not be disclosed,
distributed or reproduced without permission of XAC Automation Corporation.
XAC AUTOMATION CORP. shall not be held liable for technical and editorial omissions or errors made herein; nor for
incidental or consequential damages resulting from the furnishing, performance or use of his material.
XAC Automation Corporation
886-3-577-2738
www.xac.com.tw
