Xact X33X, Instruction Manual

OPERATION

COMMUNICATOR Mode:

The X33X COMMUNICATOR functions as a two-way communication device
while in this mode.

1. Press the MENU button for 3 seconds and a short "beep" followed by a long "beep" will

be heard, the COMMUNICATOR's LCD Screen will quickly display all of the

COMMUNICATOR's status icons, and the COMMUNICATOR will enter

COMMUNICATOR mode and display the current channel.

2. Press the MENU button momentarily to enter the MENU mode.

3. Press the MENU button briefly (for no longer than 1 second) to enter into CHANNEL

CHANGE, CTCSS CODE CHANGE, VOX, ROGER BEEP, and STANDBY/RECEIVE

modes in due order.  A short "beep" will be heard after every press of the MENU button.

Refer to the "Changing Channels" and "VOX" sections for more information.

4. Press the PTT/CALL button to exit the MENU mode at any time, or the unit will

automatically return to STANDBY mode if no buttons have been pressed for 10 seconds.

NOTE:

In order for other people to receive your transmission, they must be on the same

channel and CTCSS Code you are currently using. Refer to the "Changing Channels" and

“Changing CTCSS Code” section for more information.

Setting the Time (TIME SETTING mode):

To change the COMMUNICATOR's time settings while in WATCH mode:

1. Press the MENU button until a "beep" is heard and the displayed hour will "flash".  Press

the UP

or DOWN     button repeatedly (or hold the button to scroll) to increase or

decrease the hour and "AM" or "PM" designator to the desired settings.

2. Press the MENU button momentarily (for no longer than 1 second) and a "beep" will be

heard and the minute digits will "flash".  Press the UP

or DOWN     button repeatedly

(or hold the button to scroll) to increase or decrease the minute setting on the
COMMUNICATOR's LCD Screen.

3. Press the MENU button a third time to exit the TIME SETTING mode, or the unit will

automatically return to WATCH mode if no buttons have been pressed for 10 seconds.

NOTE:

When the LOW BATTERY LEVEL icon is blinking in WATCH mode, the buttons

will not function until the battery is charging or has been recharged. 

11

X33X Owner’s Manual (Rev3).qxd  7/16/2003  9:57 AM  Page 12