2. All LED’s will flash Red at 3 second intervals to indicate park Mode
is active.
To return to Normal Operation
1. Hold the Power button again for > 3 seconds.
2. The LED’s will return to the Normal Operation state.
Walk Mode
Geofence alerts will be temporarily disabled while in Walk Mode. The
alerts will be re-enabled when the Xact Trax Plus returns to Normal
Operation.
1. From Normal Operation mode, hold the Power button for 1.5 seconds.
2. All LED’s will flash Green at 3 second intervals to indicate walk Mode
is active.
To return to Normal Operation
1. Hold the Power again button for 1.5 seconds.
2. The LED’s will return to the Normal Operation state.
LED States
If LED is off no GSM or GPS signal can be found.
LED States
Blinking
All Green All Amber
All Red
POWER
Red - Power is on
Walk
Mode
Park
Mode
Powering
Off
GSM
Green - Connected
to celluler Network
GPS
Amber - Obtained
GPS Satellite Fix
