XAG ACB1 CommBack, Quick Start Manual

-6-

STEP 6 – Keypad (Center) and Power button until the indicator LEDS 
STEP 6 – turns OFF

STEP 6 – 

Power the Power Button once, the device will enter update 

STEP 6 – 

mode and the indicator LEDS will flash RED

STEP 7 – 

The indicator LEDS will stop flashing once the update is 

completed

Repeat this process if the firmware update are unsuccessful

5.Device connection

STEP 1 – 

Connect the ACB1 CommBack with an Type-C USB Cable to 

STEP 1 –

 the Smart Phone

STEP 2 – 

Start XPLANET APP and ensure the device is connected 

STEP 2 – successfully (the      icon turns green)

STEP 3 – 

Click on      the icon to check for Hotspot Details  

Default name:  

XAG123

Default Password: 

20070401

Hotspot Details on ACB1 CommBack can be edited

STEP 4 – 

Edit the Hotspot detail to be consistent with your Smart 

STEP 4 – 

Phone, and enable Hotspot

STEP 5 – 

Disconnect the USB Cable connecting your Smart Phone 

STEP 4 – 

and ACB1 CommBack, and waits for the device connection 

STEP 4 – 

via WiFi. Once it is connected, the WIFI connection icon on     

STEP 4 – 

“XPLANET” APP to light up (     turns green)

6.Pairing the Aircraft

STEP 1 – 

When your Smart phone is wirelessly connected via    

STEP 1 – Hotspot, access XPLANET or XGEOMATICS APP

STEP 2 – 

Select Device, and click on “Pair”

STEP 3 – 

Follow the on-screen instruction and Power on the UAV, 

STEP 3 – 

and select the corresponding device to be paired