1
Product Profile
The B13860S Smart Battery 2020 is compatible with all XAG P-Series Plant Protection UAV Modules. The Smart
Battery contains 13 large-capacity lithium polymer batteries, and is integrated with the BMS module. It enables
real-time monitoring of voltage, current, and temperature, and also features charging protection. During use, the
battery can transmit feedback information to the device in real time. In the case of low power or battery failure, the
BMS system will send an emergency stop command to ensure the safety of the device.
Overview
Handle
Control Panel
Clip
Plug Slot
ON: Normal
Flashes slowly: Low
Temperature
Flashes quickly:
High Temperature
Flashes twice:
Battery Malfunction
Battery Level Indicators
Status Indicator
Power Button
Maximum water Level
ON/OFF
1.
When the Battery is turned off, press the Power button once to check the current battery level,
indicated by the Battery level LED. If the battery is too low, recharge before use
2.
Connect the battery to an device, then press the Power button once for at least 1 second until all the
indicator lights flashes, then press and hold the power button again for at least 1 second until you hear
a beep from the battery.
3.
Repeat Step 2 to turn off the Battery
Battery ON/OFF
Max
Min
Max
Min
4
Air Outlet
Minimal water Level
Air Inlet
1
2
3
5
6
7
8
1
2
3
4
5
6
7
8
