www.xa.com/en
2
Indicator Description
Charging
Connect the power input of the charger with a 16A power cord. When the indicator turns solid green, the
power-up is finished. Securely connect the charger connector to the cooling tank. Put the battery into
the battery compartment of the tank with care and connect the charger connector to the battery. Turn
on the battery to start charging.
Indicator
Status
Description
Solid Green
Idle
Output
Flashing Green
Not connected to battery or communication failure
Solid Red
Normal
Input
Solid Green
Input normal
Flashing Green
No ground wire connection, charging can be risky
Solid Red
Device failure, protection triggered, output OFF
Flashing Red
Device overheats, output protection, output OFF
Only a 16A socket conforming to national/professional standards is allowed for the charging.
Otherwise, the charger and the battery may get damaged, and the loss arising therefrom shall be
solely assumed by the user.
This product is only compatible with XAG B13960S and B13970 Smart SuperCharge Battery without
connecting an adapter. If you want to charge other B series batteries with this charger, please contact
the local dealer or go to XAG's online shop to buy an adapter.
Note
16A Socket
