XAG AUSTRALIA
124
Propulsion
• Propeller
01. Inspect and ensure the Propeller Spinner have no damages, cracks or deformation.
02. Check and ensure the Propeller is not loose, softened, damaged or deformed.
03. Check and ensure the Propeller and the Propeller Spinner are properly tightened.
04. Check and ensure there are no missing or loose screws between the Propeller Spinner and the
Motor. All fixing screws should be accounted and firmly secured.
05. Wringing a wet rag, then clean and remove any stains or foreign objects on the Propeller.
• Motor
01. Remove the Propeller and Motor housing, then clean the Motor with a Compressed Air Duster.
02. Rotate the Motor to check the motor bearing for any abnormality, vibration or abnormal noise.
03. Inspect the Motor enamelled wire and ensure there are no damage or fracture.
04. Sway the Motor and ensure the Motor and Motor mount are firmly secured.
05. Check and ensure the wiring connector between the Motor and the ESC are firmly secured.
• ESC
01. Check and ensure the ESC have no deformation or oxidation.
02. Check and ensure the ESC are firmly secured, and there are no loose or missing screws.
03. Check and ensure there are no pesticides or other foreign objects attached on the ESC’s heat
dissipation.
