www.xa.com
9
Prepare Aircraft
Install RevoSpray System
① Attach the airframe to the RevoSpray system by lining up the holes on the bottom of the airframe with
the bosses on the top of the RevoSpray system;
② Open the left and right hasps (one on each side) and fasten the airframe to the RevoSpray system;
③ Connect the payload system cables of the airframe and the RevoSpray system. Affix them to the cable
holder;
④ Connect the two liquid tubes to the pump of the RevoSpray system.
①
②
③
③
②
④
Hole
Hole
Boss