www.xa.com/en
5
Arms Installation
4. Dismantle the Fixed Sliders of No.1 and 2
Arms
Remove the screws on the stopper of No.1 Arm’s
top sliders, and then pull out the sliders. Please
follow the same steps to dismantle the No. 2
Arm.
6. Dismantle the Fixed Sliders of No.3 and 4
Arms
Remove the screws on the limiting stopper of
No.3 Arm’s top sliders. Pull out the sliders and
remove the carbon framed fasteners. Please fol-
low the same steps to dismantle the fixed sliders
of No. 4 arm.
5. Install No.1 and 2 Arms
Insert the No.1 Arm into the designated posi-
tion along the airframe plate, then return the
top sliders to their original positions. Please
follow the same steps to install the No.2 Arm.
7. Install No.3 and 4 Arms
Insert the RTK feeder and the 2.4/5.8GHz feed-
er into No.3 Arm. Insert the arm into the des-
ignated position along the airframe plate, and
return top sliders and arm fasteners to their
original positions to complete the assembly.
Please follow the same steps to install No. 4
Arm.
Buckle
Slider
Feeder
Make sure the arms remain horizontal while installing fixed sliders.
Warning
