kubi
Enhanced Audio Kit
KUBI CLASSIC AND PLUS
KUBI CLASSIC AND PLUS
INSTALLATION INSTRUCTONS
INSTALLATION INSTRUCTONS
IMPORTANT! The goal of this
procedure is to install the
speaker bracket WITHOUT
LIFTING, MOVING OR REMOV-
ING THE ARMS. IF THE ARM
SPRINGS BECOME DISEN-
GAGED, A SEPARATE OPERA-
TION MUST BE PERFORMED!
IDENTIFY WASHER TYPE:
White Plastic or Stainless Steel
Stainless Steel Procedure:
Keep downward pressure on
the arm and use the supplied
Allen wrench to remove the
right screw and metal washer.
Keep downward pressure on
the arm and place the audio
speaker bracket over the right
arm bushing and install the
retaining screw. Tighten so the
bracket can still be rotated.
Remove the left arm screw and
metal washer.
Rotate the bracket down and
install the left screw. Tighten
both screws.
After installation of the bracket,
the arms should be retracted in
upright position.
If arms do not move freely, and
close completely on their own,
loosen arm screws slightly until
arms open and close freely.
WHITE
STAINLESS
Copyright © 2017 Xandex Inc. 1360 Redwood Way, Suite A, Petaluma CA 94954
TEL: (707) 763-7799 EMAIL: kubi@xandex.com For more infomation visit www.revolverobotics.com P/N 180-0135r1
