background image

fluence  on  the  steering  &  balance.  It 

may cause possibility of an accident, 

please extremely caution and follow 

below limitation when you equipped 

with accessories. Below are some ge-

neral or accessories. Here are some 

guidelines to follow if loading cargo or 

adding accessories to your vehicle.

Loading

The total weight of the operator, pas-

senger, accessories and cargo must 

not exceed the maximum load limit.

Maximum load 

(not include the vehicle): 150kg

When loading within this weight limit, 

keep the following in mind:

•  Cargo and accessory weight should 

be kept as low and close to the ve-

hicle as possible. Make sure to dis-

tribute the weight as evenly as pos-

sible on both sides of the vehicle to 

minimize imbalance or instability.

SAFETY INFORMATION

6

•  The  wear  of  proper  jacket,  shoes, 

groves etc., can be better protection, 

reducing  the  degree  of  injuiry  from 

un-expected accident.

•  Never  wear  loose-fitting  clothes, 

otherwise they could catch on the 

control levers or wheels and cause 

injury or an accident.

•  Never touch the engine or exhaust 

system during or after operation. 

They become very hot and can 

cause burns. Always wear protective 

clothing that covers your legs, ank-

les, and feet.

Modifications

Modifications made to this vehicle that 

not approved by maker, or the removal 

of original equipment, may let vehicle 

unsafe for use and cause severe per-

sonal  injury.  Modifications  may  also 

make your vehicle illegal touse.

Loading and accessories

Adding accessories or cargo to your 

vehicle may cause the different on the 

weight distribution of vehicle and in-

•  Make sure that accessories and 

cargo are securely attached to ve-

hicle before riding

•  Never attach any large or heavy 

items to the handlebar, front fork, or 

front fender. Such items can create 

unstable handling or a slow steering 

response. 

Accessorries

Genuine accessories have been speci-

fically designed for use on this vehicle. 

If need, please contact with dealer for 

detail. Since the maker can not test all 

other accessories , you must perso-

nally be responble for the proper selec-

tion, installation and use of non-OEM 

accessories. 

Keep the following guidelines in mind, 

when mounting accessories.

•  Never install accessories or carry 

cargo  that  would  influence  on  the 

ground clearance, limit suspension 

travel, steering,or obscure lights or 

turning lights, reflectors.

Summary of Contents for D01




























































Reviews: