7-12 Advanced Imaging
bb
___________________________________
5.
Measure the horizontal line. If it is shorter or longer than the
measurement shown underneath the horizontal scroll bar in
figure 7.3, adjust the scroll bar until the measurement reads the
exact length of your line.
6.
Measure the vertical line. If it is shorter or longer than the
measurement above the vertical scroll bar in figure 7.3, adjust the
scroll bar until the measurement reads the exact length of your
line.
7.
Click Update/Print. When the new page prints, measure the
lines. They should be the correct lengths. If not, repeat steps 5,
6, and 7 until they are correct.
8.
Click Close when both lines are the correct length. You return
to Command Center’s main screen.
9.
Select Margin Adjustment… from the Printers menu. The
following screen appears.
Fig. 7.4 Align Printer Margins
