9-4 Options
bb
___________________________________________
Installing the Paper Feeder
To install the paper feeder
1.
Unpack the paper feeder and, with the connector to the back
left, set the feeder next to the printer.
2.
Make sure the feeder’s two securing locks, one on each side
under the lock icons, are pulled forward so that they are open
(fig. 9.1).
MANUAL
READY
ON LINE
FORM
FEED
RESET
TEST
ENTER
MENU
TRAY
SELECT
Fig. 9.1 Open the Feeder’s Securing Locks
3.
Turn off your printer and disconnect the power cord and all
interface cables.
4.
Remove the connector cover from the back left corner of the
printer (fig. 9.2).
Fig. 9.2 Remove the Connector Cover
