________________________________________________________________
Repacking Procedure 5
3.
Push the multipurpose feeder’s tray extension back in (fig. 8); then, close the multipurpose feeder
(fig. 9).
Fig. 8 Close the Tray Extension
Fig. 9 Close the Multipurpose Feeder
4.
Repack the oversize media support in its original packing material.
Note:
If you are not shipping the oversize media support, store it in a location that meets the guidelines
for storing the printer (see your printer user’s guide.)
Removing a Paper Cassette Feeder
1.
Make sure the Multipurpose feeder is closed and all paper cassettes and media have been removed
from the printer.
2.
Remove the 2 IOT screws securing the feeder to the printer (fig. 10). Then, have someone help you
lift the printer straight up until the printer is free of the feeder’s stubs (fig. 11) and set the printer
aside on a stable surface that will support its weight.
Warning!
The printer weighs approximately 58.5 lbs (26.5 kg) without toner, cassettes, and media
installed.
Always have two people lift the printer
using the recessed grip areas on the
right and left sides.
Fig. 10 Remove the IOT Screws.
Fig. 11 Remove the Printer from the Feeder
3.
Repack the paper cassette feeder in its original packing materials, making sure to include the 2 IOT
screws and the paper cassette with its cover.
Note:
If you are not shipping the paper cassette feeder, store it in a location that meets the
guidelines for storing your printer (see your printer user’s guide).
