31
E
RROR
M
ESSAGES
The following are some of the more
common error messages. For additional error
messages, see your printer User’s Manual.
Toner Low
XXX TONER LOW appears on the
second line of the display to indicate that
color
XXX
toner cartridge is getting low.
What to do—
Be sure to have a
replacement cartridge on hand.
If you have changed the LOW
TONER item in the SYSTEM
CONFIG MENU to STOP, the
Attention light will blink and you
must either replace the toner
cartridge immediately or press ON
LINE to continue printing.
Install New Toner
XXX TONER EMPTY indicates that the
cartridge has run out of toner.
What to do—
Replace the toner cartridge.
Replace Image Drum
CHANGE XXX IMAGE DRUM appears
on the second line of the display; color
XXX
image drum needs to be replaced.
What to do—
Replace the image drum
(see instructions with the drum).
420: Memory Overflow
The amount of data in the file being
printed has exceeded the printer’s memory.
What to do—
Reduce the size of the file
and/or install additional memory (see your
User’s Manual for more information).
500: Manual Print (Load
mmmm)
The printer has received a print job from
the MP tray and no media is loaded in the
tray.
What to do—
Load the requested media in
the MP tray; then, press ON LINE.
TTTT Near End
Appears on the second line of the display
to indicate that the media in feed path TTTT
is almost out.
What to do—
Load more media before
printing any large print jobs.
480: Stacker Full (Remove
Paper)
The top (face down) output tray is full.
What to do—
Remove the stack of printed
sheets from the tray.
Summary of Contents for CL30
Page 1: ...100 100612...
