Model BXAUDIO4X4
Page: 5
© 2005 Xantech Corporation
CONTROLLER/AMPLIFIER FEATURES
Central Processor
•
Four Audio Source Inputs
•
Current sensing (>20mA-<10A) for each input for power management of common source components and
using the optional CSM1 Current Sense Module
•
Four source specific IR emitter ports and one common IR output.
•
Internal memory (96 Kbytes non-volatile flash) for storing IR codes.
•
Programmable via EZProgramming™
•
Recognizes Xantech RC68+ Commands for wireless IR Zone and Source control (RC68+ Group Code 48)
•
Outputs single IR commands or IR sequences.
•
Sends "busy" signal to keypads when system is active.
•
IR learning eye on front panel of Controller/Amplifier used for source component macro programming
•
DB-9 RS232 Serial port for programming, expansion and upgrading firmware (Future Proof).
•
Also available in 230 VAC / 50 Hz. (Part No. BXAUDIO4X4-77SYS)
Zone Features/Specifications
•
Each zone has 1 RJ45 connector for BXAUDIO4X4 keypad, 1 speaker-pair terminal and a 12VDC status
output.
•
Party Mode: Multiple zones can be linked to behave as one zone.
•
25 Watts per channel (rated at 8-Ohm; 4-Ohm safe).
•
Frequency response: 12 Hz to 55KHz (±3dB)
•
THD: <0.08%.
•
Signal-to-noise ratio: > 96dB A-weighted
EZProgramming™ Features:
•
No PC Required.
•
Front Panel programming of all IR codes for control of source components.
•
Program sequences of up to 40 IR codes per button.
•
Incorporate delays in sequences to allow for amplifier power-up, light dimming, screen drop, drape closure,
etc.
•
Intelligent Power Management: Automatically keeps Source Components in sync with Zone power status
(Requires CSM1 Current Sense Module).
KEYPAD FEATURES
•
Flush-mount, snap-in wall unit. Fits into standard Dual-Gang J-Box with universal wall mounting plate.
•
16 buttons (4 source select, 11 function, 1 power).
•
Backlit buttons.
•
Bi-colored Status LED for power and status.
•
Broadband IR receiver (30KHz to 100KHz).
•
Connects to BXAUDIO4X4 Controller/Amplifier via CAT5 cable with RJ45 connectors.
•
Two RJ45 connectors allow two keypads per zone.
