background image

 

 

 

08905153A 

 

  - 

 

1. Introduction 

Modern Convenience 

The D5RH 4 Source, 4 Zone Digital Audio Distribution Hub with DIGI-5 Technology and related 
products from Xantech provides the ability to listen to 4 different audio sources in up to 28 separate 
zones of the home, all over CAT-5 wiring for total flexibility and convenience. No need to have 
multiple audio systems in different areas, just select a source from one of Xantech’s premium in-wall 
keypads, sit back and enjoy! 

Crystal Clear Digital Sound 

End-to-end digital architecture means that the entire signal path of the audio system remains in the 
digital domain from start to finish. This means that noise, signal loss and other unwanted effects are 
never present. Each keypad contains a 30 Watt per channel digital amplifier that allows the user to 
play music at loud volume when desired. This also means that music at any volume is full and rich, 
without distortion and with plenty of bass! 

Simple, Logical Installation 

A D5RH-based system connects using CAT-5 and speaker wire, making them reliable and easy to 
install. Any digital or analog audio source can be connected directly to the D5RH Digital Audio 
Distribution Hub. D5KP Amplified Keypads are connected to the D5RH using CAT-5 wiring 
(inexpensive and reliable), while speakers are connected to the D5KP Amplifier Keypad using 
traditional speaker wire. This eliminates the need for multiple long runs of speaker wire streamlining 
the wiring process and slashing wiring costs. 

Entertaining Possibilities 

The D5RH’s Whole House Music and Zone Grouping features make entertaining more fun than ever. 
Fully customized audio options allow for control of the entire house from one location and also allow 
for the creation of multiple-zone linking where groups of zones work together in party mode. 

Control for Parents 

The Source Lock Out feature allows you to disable specific sources in the kid’s rooms that you don’t 
want them to access. 

About DIGI-5 Technology 

DIGI-5 is a revolutionary new technology standard that provides a complete end-to-end digital audio 
solution over CAT-5 wiring. DIGI-5 is based on advanced digital distribution and amplification circuits 
that allow multi-room audio systems to be installed quickly and cost effectively. 
 
DIGI-5 is a collaboratively developed technology that is licensed by the Linear Home Technology 
Group and is being initially integrated on a Linear group-wide basis, targeted to expand market and 
consumer acceptance of such systems. 

Summary of Contents for D5RH

































Reviews: