Page 6
Model MRC44KP
© 2001 Xantech Corporation
6. Source 1 Selector.
Selects source input 1, reverses source icon on LCD
Display when source is selected and sends IR commands programmed
to this button (if any) to the source 1 and common emitter outputs. Also
used in Dynamic Monitor Lockout and Dynamic Zone Link Modes.
7. Source 2 Selector.
Selects source input 2, reverses source icon on LCD
Display when source is selected and sends IR commands programmed
to this button (if any) to the source 2 and common emitter outputs. Also
used in Dynamic Monitor Lockout and Dynamic Zone Link Modes.
8. Source 3 Selector.
Selects source input 3, reverses source icon on LCD
Display when source is selected and sends IR commands programmed
to this button (if any) to the source 3 and common emitter outputs. Also
used in Dynamic Monitor Lockout and Dynamic Zone Link Modes.
9. Source 4 Selector.
Selects source input 4, reverses source icon on LCD
Display when source is selected and sends IR commands programmed
to this button (if any) to the source 4 and common emitter outputs. Also
used in Dynamic Monitor Lockout and Dynamic Zone Link Modes.
10. Vol
+
. Increases zone volume and moves the Volume Bar on the LCD
Display to indicate volume level (non-programmable).
