Model MRC88
Page: 17
© 2003 Xantech Corporation
MRC88 KEYPAD FEATURE DESCRIPTIONS
6
7
5
2
4
11
12
9
8
10
14
13
1
3
Figure 4 – The Model MRC88 Keypad – Front Panel Features and Functions
MRC88 KEYPAD - FRONT FEATURES:
1. MRC88
Keypad.
2. Power.
Turns the zone ON and OFF. Can be programmed with IR codes or sequences.
3. IR
Sensor.
Receives IR from hand-held remotes to control both source components and the MRC88
system. A Programmable Learning Remote such as the Xantech URC2 is recommended for integrating the
IR commands of the MRC88 and source components into a single controller. Compatible with most brands
of remote controls, though some may not be programmable and will therefore only control the source
components.
4. Status
Indicator
LED
. Will indicate zone/system status and will flash as IR is received at the IR Sensor.
These indicators, one for each Keypad, provide the following Information:
a) LED Off = Zone OFF
b) Steady Green = Zone ON
c) Slow Green Blink = Zone MUTE
