![background image](http://html1.mh-extra.com/html/xantech/splcd64g/splcd64g_installation-and-programming-manual_3181431079.webp)
SmartPad LCD
™
Page:
79
© 2008 Xantech Corporation
SPLCD 64V VIDEO CONNECTIONS & PROGRAMMING
The SmartPad LCD 64V includes the same features as the 64G (Graphics version) with the added features of
PiP
and a
Full Screen Video
display. When used with the 64V,
Transparent Button Overlays
present a clear
and seamless integration of video menu navigation and device control.
FIRMWARE NOTE:
In order to utilize all
SPLCD64V Features
,
the unit must be configured with
Firmware
Version 1.29
or above. (The SPLCD64V
can
be programmed with Xantech
Dragon Drop-IR (SPLCD) Version
1.2.0
or higher, but downloading
Universal Dragon
from
www.xantech.com
is highly recommended for
programming this device.)
Figure 60 – Who Am I Window
Checking Firmware Version
To check the SPLCD64V for proper firmware version, connect the
PC
running
Universal Dragon
to either the
Com Port
or
USB Port
on the
SPLCD Front Panel
using the appropriate included cable. In the
Menu Bar
,
click the
Base Unit Menu
and select
Who Am I
from the drop-down.
NOTE:
IT IS HIGHLY RECOMMENDED THAT THE
SPLCD
BE UPGRADED TO THE
LATEST
FIRMWARE
VERSION
BEFORE DOING ANY PROGRAMMING TO TAKE ADVANTAGE OF THE MOST CURRENT FIXES
AND FEATURES. SEE SECTIONS:
WHO AM I
AND
SPLCD FIRMWARE UPGRADES
IN THIS MANUAL
FOR ADDITIONAL INFORMATION.