background image

CB18 Connecting Block (not included) 

 
The CB18 provides a convenient way to parallel many wires 
onto a 4 conductor bus. You can easily connect many home run 
leads from volume controls to the output terminals of a main 
amplifier.  

 

 
The CB18 features the following: 

-

  Nine 4-terminal plug-in connectors on a 4-conductor bus. 

-

  One-in eight-out or eight-in one-out capability.  

-

  Adhesive backed labels are included for attachment to 

the plug-in terminals so that the speaker lead 
connections can easily be identified.  

-

  High current design allows amplifiers rated as high as 

500 Watts to be used.  

-

  Screw terminals handle wire sizes from 24 to 12 gauge.  

-

  Dimensions: 11-¼” x 1-¼” x 1-¼”. 

 

 
 
 
 
 
 
 
 
 
 

Warranty Statement 

 

Xantech 5 Year Limited Warranty 
(Effective for products sold after July 1, 2006) 
Xantech Corporation (“Xantech”) warrants to the holder of a valid proof of purchase as the first 
end-user purchaser (“You”), its products to be free from defects in materials and workmanship 
for the periods specified above from the date of purchase. This limited warranty extends only to 
You for product purchased and used in the United States of America. For product purchased 
outside of the United States of America, the terms of this warranty apply EXCEPT that You must 
contact the Xantech authorized distributor in your region for warranty services. Product is not 
intended for end user installation. If within the applicable warranty period above You discover 
such item was not as warranted above and You promptly notify Xantech in writing, Xantech shall 
repair or replace the items at its option. Xantech may elect which remedy or combination of 
remedies to provide in its sole discretion. Xantech may use functionally equivalent 
reconditioned/refurbished/pre-owned or new products or parts under this limited warranty. This 
warranty shall not apply (a) to product which shall have been installed by other than an 
authorized Xantech installer, (b) to installed product which is not installed to Xantech’s 
specifications, (c)  to product which shall have been repaired or altered by others than 
Xantech, (d)  to charges for installation or set up or adjustment of customer controls, (e)  to 
product that has suffered normal cosmetic deterioration (f)  to product which shall have been 
subjected to negligence, misuse, abuse, accident, or damage by circumstances beyond 
Xantech’s control, including, but not limited to, lightning, flood, electrical surge, tornado, 
earthquake, or any other catastrophic events beyond Xantech’s control, or (g) to product which 
shall have been subjected to improper operation, connected equipment failure or malfunction, 
inadequate packing or shipping damage, maintenance or storage, or to other than normal use of 
service. The foregoing warranties do not cover reimbursement for labor, transportation, shipping, 
removal, installation, or other expenses which may be incurred in connection with repair or 
replacement. All claims for product shipping damage must be processes within 3 days of receipt 
by You. A Xantech Return Authorization (RA)  must be obtained from Xantech by You, your 
installer or your distributor for Product covered under this warranty. Covered product must be 
sent to Xantech together with proof of purchase, RA number, prepaid and insured to Xantech. 
Freight collect shipments will be refused. Risk of loss or damage in transit is borne by the 
sender. Xantech's warranty does not cover Products which have been received improperly 
packaged, altered, or physically damaged. Products will be inspected upon receipt. Except as 
may be expressly provided and authorized in writing by Xantech, Xantech shall not be subject to 
any other obligations or liabilities whatsoever with respect to equipment manufactured or sold by 
Xantech or services rendered by Xantech. 
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER 
EXPRESSED AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
ATTENTION: TO OUR VALUED CONSUMERS 
To insure that consumers obtain quality pre-sale and after-sale support and service, Xantech 
products are sold exclusively through authorized dealers and authorized distributors. Xantech 
products are not sold online. The warranties on Xantech products are NOT VALID if the products 
have been purchased from an unauthorized distributor or an online E-tailer. In order to 
determine if your Xantech re-seller is authorized, please call Xantech (800) 843 - 5465. 
 

Xantech Corporation 

13100 Telfair Avenue, 2/F 

Sylmar, CA 91342 

 

Installation Instructions, Volume Controls  

© 2006 Xantech Corporation, Document #08905078A 

This document is copyright protected. No part of this manual may be copied or reproduced in 

any form without prior written consent from Xantech Corporation. 

Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions 

made in this document. 

Summary of Contents for XVC100











Reviews: