60
Freedom SW Installation Guide
Specifications
NOTE
: All inverter specifications are at nominal conditions: 12 (or 24) volts DC inverting 120 volts AC, unless otherwise specified.
Inverter Specifications
Freedom SW 2012 Freedom SW 2024 Freedom SW 3012 Freedom SW 3024
Output wave form
pure sine wave (true sine wave)
Output power
2000 W (continuous at 30 °C)
3000 W (continuous at 40 °C)
Surge rating (5 seconds)
4000 W
6000 W
Output current
17 AAC
24 AAC
Peak output current
55 AAC
80 AAC
Output frequency
60 Hz ± 0.2 Hz
60 Hz ± 0.2 Hz
Output voltage
120 VAC
120 VAC
AC output connection/s
Single
Split phase in/dual out,
Dual in/dual out
Peak efficiency
90%
94%
90%
94%
No-load current draw (Inverter On)
<3 ADC
<1.5 ADC
<3 ADC
<1.5 ADC
Standby current draw (Inverter Off)
<0.25 ADC
<0.15 ADC
<0.25 ADC
<0.15 ADC
Input DC voltage range
10–16 VDC
20–32 VDC
10–16 VDC
20–32 VDC
Low battery voltage shutdown cut-off
10.5 V (selectable)
21.0 V (selectable)
10.5 V (selectable)
21.0 V (selectable)
High battery voltage shutdown cut-off
16.5 V (selectable)
33.0 V (selectable)
16.5 V (selectable)
33.0 V (selectable)
Freedom SW 3K2K InvChg Install Guide.book Page 60 Wednesday, October 12, 2011 4:40 PM