40
Freedom SW Owner’s Guide
Configuring the Freedom SW using the SCP
Viewing the System Status Screen
The System Status screen displays system activity. The
information appearing on the System screen varies with the
status of the inverter/charger. See “Reading the System Status
Screen” on page 33. Go back to “Reading the Freedom SW
Device Setup Screen” on page 35 for an explanation of the
different states of the inverter/charger. For example, Figure 17
shows the Freedom SW in the bulk stage of charging.
You cannot select or change any of the information on the
System Status screen. If you would like to view more detailed
information, press the
Enter
button (indicated by the menu
arrow) to go to the Select Device menu.
Viewing the Select Device Menu
The Select Device menu is where you can view a list of all the
Xanbus-enabled devices in your power system.
At least two devices are sure to appear together with System
Settings and Clock – the Freedom SW Inverter/Charger and
the Xanbus SCP. Other devices such as the Xanbus AGS and
the Freedom Sequence Intelligent Power Manager appear
only when they are connected and installed.
Figure 17
Bulk System Screen (Example)
System Status
menu
EnInv
EnChg
Shr
Battery
BatLev
Load
AC In
12.1V -257A 84
”
F
Invert
120V 10A 12A
0V 0A 0A
Figure 18
Select Device Screen
Select Device
System Settings
FSW3012 00
XAGS 00
XSCP
FSW Owners Guide.book Page 40 Tuesday, August 7, 2018 9:03 AM
Summary of Contents for Freedom SW 815-2012
