Product Safety Information
viii
Freedom X Owner's Guide
WARNING
ELECTRICAL SHOCK HAZARD
l
Replace the wiring compartment cover before turning on
power to this equipment.
l
Use a torque screwdriver to tighten the captive nut panel
screw to 5 in-lb torque to ensure a proper ground connection
and a required tool access to the wiring compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
WARNING
FIRE AND EXPLOSION HAZARD
l
Unit’s components may produce arcs or sparks.
l
Do not install near batteries, in machinery space, or in an
area in which ignition-protected equipment is required.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
Areas include any space containing gasoline-powered machinery,
fuel tanks, as well as joints, fittings, or other connections between
components of the fuel system.
CAUTION
ELECTRICAL SHOCK AND FIRE HAZARD
l
Do not open. No serviceable parts inside. Provided with
integral protection against overloads. Bonding between
conduit connections is not automatic and must be provided
as part of the installation.
l
Read guide before installing or using.
l
Do not cover or obstruct ventilation openings.
l
Do not mount in zero-clearance compartment – overheating
may result.
l
Do not expose to rain or spray. This inverter is designed for
marine applications only when additional drip protection is
installed in certain orientations. See “Approved Mounting
Orientations” on the Installation Guide for more information.
l
Install GFCIs only as specified in this guide. Other types may
fail to operate.
l
Do not connect AC OUT to any other source of power.
Damage to unit may occur.
l
For AC IN and AC OUT, use wires suitable for at least 75°C.
Failure to follow these instructions can result in injury or
equipment damage.
