Features and Specifications
Specifications
Release 3.1
33
Mechanical
Specifications
Front Panel V and I Control
10-turn voltage and current potentiometers
Front Panel Voltage Control
Resolution
0.02% of maximum voltage
Front Panel Voltage and Current
Meters
3.5-digit green numeric LED displays. For
accuracy specifications, see Table 1.4 and
Table 1.5.
AC Input Connector Type
3-terminal 34 A, 250 V, right angle, PC mount, wire
clamp connector with removable strain relief cover
Input Fuses
1
1 A, 250 V, 5 x 20 mm slow fuse (T), location: F34;
2 A, 250 V, 5 x 20 mm time delay (T), location:
F95;
10 A, 250 Vac, 5 x 20 mm fast high interrupt (F),
location: F29;
30 A, 300 Vac, 10.3 x 41.3 mm medium time lag
(T), locations: F2, F4.
Output Connector
6 V to 40 V models: nickel-plated copper bus bars
with removable bus bar shield; bus bar holes:
0.332 in. (8.17 mm) diameter (D) (1), 0.197 in. (5.0
mm) D (2);
60 V to 600 V models: 4-terminal wire clamp
connector.
Sense Connector
5-terminal wire clamp connector (2 piece)
Analog Programming Connector
15-terminal wire clamp connector (2 piece)
Chassis Ground
Two chassis ground screws located on rear panel
for bonding connections
Cooling
Fan cooled. Air exhausts to rear. Over temperature
shutdown: automatic restart or latch off
(switch-selectable).
Mounting
Rack mount ears integral to the front panel.
Weight
Approximately 18 lb. (8.2 kg)
Approvals
CE-marked units are approved to IEC 1010-1
safety standard and EN50081-2 and EN500082-2
EMC standards, and are CSA certified to C22.2
No. 1010.1. CE-marked units are also approved to
U.S. requirements of NRTL/C and are UL listed to
UL3111-1, 1st edition, (up to 40 °C). Additional
standards met: FCC, part 15, class A EMI
standard.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
