manualshive.com logo in svg

Xantrex XTR 100-8.5, Operating Manual

The Xantrex XTR 100-8.5 is a high-performance power inverter designed for reliable and efficient operation. Ensure proper use and maintenance by downloading the free Operating Manual from our website. Get detailed instructions and information on features to maximize performance and longevity of your product. Visit 88.208.23.73:8080 for manual download.

Share
Download
background image

Contents

xii

M370046-01

5 Remote Operation

Introduction  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5–2
Hardware and Connection Setup- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5–3

Configuring Remote Control Using RS-232   - - - - - - - - - - - - - - - - - - - - - - - - -5–3
Configuring Remote Control Using RS-485   - - - - - - - - - - - - - - - - - - - - - - - - -5–7
Configuring Remote Control using the USB Connector   - - - - - - - - - - - - - - - - -5–9
Setting Up the PC to Use the USB Connection   - - - - - - - - - - - - - - - - - - - - - - -5–9
Ethernet (ENET) or GPIB Connector (Optional)  - - - - - - - - - - - - - - - - - - - - - 5–15
Multiple Power Supply Connections to RS-485 Bus - - - - - - - - - - - - - - - - - - - 5–15

Terminal Configuration- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–17

Data Format - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–17
End of Message   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–17
HyperTerminal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–17
Selecting the Appropriate Communication Port  - - - - - - - - - - - - - - - - - - - - - - 5–20
Multichannel Address Setting  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–21
Remote Interface Addressing  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–22
Multichannel Commands Explained   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–23
Status Reporting in SCPI  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–25

Status Registers Model from IEEE 488.2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–27
Status Byte - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–28

Error/Event Queue (ERR)   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–28
Questionable Status Register Summary (QSR)   - - - - - - - - - - - - - - - - - - - - - - 5–28
Message Available (MAV) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–29
Standard Event Status Summary (ESB)   - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–29
Master Summary Status (MSS)  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–29
Request Service (RQS)   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–29
Operation Status Register Summary (OSR) - - - - - - - - - - - - - - - - - - - - - - - - - 5–30
Standard Event Status Register (SESR)   - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–31

Standard SCPI Register Structure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–34
OPERation Status Register  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–35

Current SHare Sub-Register  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–38
Operation Status Register Commands   - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–39
Current Sharing Sub-Register Commands - - - - - - - - - - - - - - - - - - - - - - - - - - 5–40
Shutdown Sub-Register Commands - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–41
Protection Sub-Register Commands - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–42

QUEStionable Status Register - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–43

VOLTage Sub-Register  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–46

All manuals and user guides at all-guides.com

Summary of Contents for XTR 100-8.5































































































































































































































































































Reviews:

No comments

Related manuals for XTR 100-8.5

Caen SY 1527 Technical Information Manual preview
SY 1527
Brand: Caen Pages: 17
Icom PS-300 Instructions preview
PS-300
Brand: Icom Pages: 2
Parkside PAH 1700 B2 Translation Of The Original Instructions preview
PAH 1700 B2
Brand: Parkside Pages: 40
Cooper Hand Tools Weller Pyropen Jr. Operating Instructions Manual preview
Weller Pyropen Jr.
Brand: Cooper Hand Tools Pages: 31
LANCMAN VS-A Series Instructions For Safe Use preview
VS-A Series
Brand: LANCMAN Pages: 32
Cotech 18-3083 Instruction Manual preview
18-3083
Brand: Cotech Pages: 36
King Canada KHP-20T-GGN Instruction Manual preview
KHP-20T-GGN
Brand: King Canada Pages: 6
Sears 103.0305 Operating Instructions preview
103.0305
Brand: Sears Pages: 4
Far Tools P 13G Manual preview
P 13G
Brand: Far Tools Pages: 46
Cleco 823150PT Operation & Service Manual preview
823150PT
Brand: Cleco Pages: 16
Draper 79340 Instructions Manual preview
79340
Brand: Draper Pages: 12
Pulsar PSCC20350 Manual preview
PSCC20350
Brand: Pulsar Pages: 2
Lambda Electronics LRS-56 series Instruction Manual preview
LRS-56 series
Brand: Lambda Electronics Pages: 21
Parkside PAS 4 B3 Translation Of The Original Instructions preview
PAS 4 B3
Brand: Parkside Pages: 65
Pulsar PSC13008 Quick Start Manual preview
PSC13008
Brand: Pulsar Pages: 4
Bohmer-AG Eco Power Operation Manual preview
Eco Power
Brand: Bohmer-AG Pages: 27
VARO Powerplus POWX11831 Manual preview
Powerplus POWX11831
Brand: VARO Pages: 9
California Instruments iL Series User Manual preview
iL Series
Brand: California Instruments Pages: 100

Brands by name

Popular brands

Load more brands