X3102r user manual V. 2.0
19 / 33
The following (example) will be displayed for checking your
setting.
Configuration
MODE: Bridge
FUNCTION: R1483
Spanning Tree: Enable
# VPI VCI Package filter
1: 2 34 ANY
Preserve the configuration (y/n): (select
“y”
to use
the setting or
“n”
to leave without change. Start
again to set parameters)
Configuration will have no effect until after save and
restart.
All the parameters will not be effective under the setting
being saved and restart again. Above message is to
remind operator. Continue with save command
>>save (with
“enter”
key to execute)
Wait until the following message displayed on your screen
completely. Don’t power off the modem during this stage.
Saving configuration...
Configuration saved.
Updating flash filing system ...
SDRAM size = 0x800000
Booting...
System starts...
IV. Setting Up Router
The word with background “ “ is prompt following by a command.
1. If you are in Bridge mode use “mode” command to switch to
Router mode before setting parameters.
