X3102r user manual V. 2.0
24 / 33
3.2 Step by Step Setting
>> quick
R1483(r)/ IPoA(i)/ PPPoA(p)/ PPPoE(pe): (select
“i”
for
IPoA routing)
Ethernet IP (192.168.1.1): (set LAN IP address)
Subnet mask (255.255.255.0): (set mask)
VPI(0-1023): (set VPI value)
VCI(1-65535): (set VCI value)
WAN IP: (set WAN IP address)
Gateway : (set Gateway IP address)
Add another PVC? (y/n): (set another PVC with
“y”
or
“n”
to complete PVC setting)
The following (example) will be displayed for checking your
setting
Setup Configuration
FUNCTION: IPOA
Ethernet IP: 192.168.1.1
Subnet Mask: 255.255.255.0
# VPI VCI WAN IP Gateway IP
1: 5 45 192.168.1.3 192.168.1.10
Preserve the configuration (y/n): (
“y”
to use the setting
or
“n”
to leave without change. Start again to set
parameters)
Configuration will have no effect until after save and
restart.
All the parameters will not be effective under the setting
being saved and restart again. Above message is to remind
operator
3.3 NAT function
This function will enable PC users in your LAN environment
to access outside with only one IP address (IP sharing) and
one access account.
