X5368r-P3
User’s Manual Version 1.0
33
5.4.6 PPPoE Routed
Click
Create a new service
to display the type of service.
Select
PPPoE routed
and then click on the
Configure
button.
X5368r-P3
User’s Manual Version 1.0
34
Type
PPPoE router
for the description.
Define the
VPI
,
VCI
value to match the DSLAM/ISP setting.
Set
PPPoE Auto Connect
to
Enabled
.
Use WAN IP default setting (0.0.0.0.)
If required enable
Discover IP Subnet from IPCP
and
PPP
IPv6CP
Leave
Access concentrator
and
service name
blank
Leave LLC/HDLC header Mode to
off
.
Select
PAP
and type the
Username
and
Password
and type
idle time
number.
Click on the
Configure
button to confirm the configuration.
