X5368r-P3
User’s Manual Version 1.0
61
5.13.3 Dialing
Plan
SIP Calling Digitmap
: This command enables you to configure
‘VoIP with PSTN switching’ on your system. Using this
command you can define a range of
dial plans
which specify the
numbers which are connected to
the PSTN. If the number dialled matches a number defined in the
dial plan, then the number is routed to the
PSTN. Otherwise, the number is routed to the VoIP network where
the number is then matched
against the digit map defined for SIP or MGCP.
PSTN Calling Rule Entries:
Dipslays current dial plans
To create a new rule click on
Create a new PSTN calling rule
X5368r-P3
User’s Manual Version 1.0
62
5.13.4 MGCP
Settings
Displays current MGCP settings, click on
Modify MGCP
CallAgents...
To make changes to the call agents.