X5368r-P3
User’s Manual Version 1.0
67
Speed-dial Settings
This command displays all the speed dials which you have setup for
the particular endpoint on your
system.
Edit speed dial settings
Dialstring
: Enter the dialstring for the speed dial
Code
: This command sets up a speeddial code for a specified
endpoint.
For each endpoint you can set up either 8 or 32 speeddial codes. 8
is the default number of speed
dials for each endpoint.
X5368r-P3
User’s Manual Version 1.0
68
5.14 SNTP Client
Click on the
SNTP Client
link on the navigation bar. NTP (Network
Time Protocol) is used to synchronize the real time clock of a
computer This section allows you to configure the time zone of the
Router and synchronize it with a timeserver.
Add NTP Server IP Address:
Enter the IP address of the NTP
server and then click on the
Add
button.
Add NTP Server Hostname:
Enter the host name of the NTP
server and then click on the
Add
button.
