X5368r-P3
User’s Manual Version 1.0
79
6.3 ADSL
Click on the
A1
link on the navigation bar. This page displays a table
of the default ADSL settings. This includes standard, trellis coding,
coding gain, EC/FDM mode, and Tx power attenuation. You may
change the default settings in order to accommodate your needs,
click on the
Startup
button when completed.
Activate Line:
Select
None
,
Abort
, or
Start
from the drop-down
list.
Whip:
Select
Inactive
,
Serial
, or
TCP
from the drop-down list.
Standard:
Select an ADSL standard from the drop-down list.
Options available are:
G.dmt, G.Span, t1.413, g.lite, Multimode,
ALCTL_14, ALCTL,
and
ADI
. The default setting is
Multimode
.
Ec Fdm Mode:
Select EC or FDM from the drop-down list.
Annex Type:
Select an Annex A or G.Span from the drop-down
list.
Defaults:
Select an Annex A or G.Span from the drop-down list.
Reset Defaults:
Select
True
or
False
from the drop-down list.
o
Note:
The
Reset Defaults
option will not take effect until the
configuration has been saved and the Router has been
restarted.
Click on the
Apply
button to confirm the changes.
Click on the
View Advanced Attributes
link at the top of the
page to view more detailed settings about the ADSL port.
X5368r-P3
User’s Manual Version 1.0
80
6.4 Raw Ethernet
Click on the Raw
Ethernet
link on the navigation bar. This page
displays the Ethernet port configuration. You may enter a value
ofr the MAC Address of the device. Select
True
for reset
defaults to return to the default setting.
