X5368r-P3
User’s Manual Version 1.0
91
7.6 VoIP clear dcmdials
7.6.1 Syntax
voip clear dcmdials
7.6.2 Description
This command clears all dial plans, which have been set
up on the Voice-IAD system.
To delete individual dial plans, use the command,
voip
delete dcmdial
.
To add new dial plans use the command,
voip add
dcmdial
.
7.6.3
Example
prompt>
voip clear dcmdials
X5368r-P3
User’s Manual Version 1.0
92
7.7 VoIP delete dcmdial
7.7.1 Syntax
voip delete dcmdial <number>
7.7.2 Description
This command deletes a specific dial plan which has been
set up on the Voice-IAD system. To see
the current dial plans which have been setup, use the
command voip list dcmdials.
To remove all the dial plans which have been setup on the
Voice-IAD system, use the command
voip clear dcmdials.
7.7.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 4: voip delete dcmdial CLI command
7.7.4 Example
prompt> voip delete dcmdial 1
