X5368r-P3
User’s Manual Version 1.0
117
7.26
VoIP set sip packetperiod
7.26.1 Syntax
voip set sip packetperiod <period>
Description
This command sets the length of the Voice sample (in ms)
which is put in a packet. Typically, this
value is set to 20 but can be set to other values between 5
and 50 depending on the Codec being
used. The lower the value, the more Voice samples that
will be generated.
Packetization of telephony audio data for direct insertion
into network buffers
When a call is set up using SIP, the two SIP agents use
RTP (Real-time Transport Protocol, RFC
3550) packets to send voice samples to each other
directly. By default, the packets contain
The length of the Voice sample (in ms) which is put in a
packet. Typically, this value is set to 20 but
can be set to other values between 5 and 50 depending
on the Codec being used. The lower the
value, the more Voice packets that will be generated.
7.26.2 Options
The following table lists the
X5368r-P3
User’s Manual Version 1.0
118
7.27
VoIP set sip proxyroute
7.27.1 Syntax
voip set sip proxyroute {loose|strict}
Description
This command sets the type of SIP routing proxy to use
for SIP calls. Currently, there are two
versions of this proxy. The SIP Proxy Server you are
using may not support both sets of proxies so
you may need to alter this setting to be compatible with
the SIP Proxy Server you are using.
7.27.2 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-22:voip set sip proxyroute CLI command
