X5368r-P3
User’s Manual Version 1.0
11
Software Upgrade through a Web-browser
Step 1:
Extract the ZIP file for updated firmware.
Step 2:
Connect
X5368r-P3
via the local Ethernet port or remote
ADSL link, making sure that the
X5368r-P3
Ethernet IP
address and your terminal are properly configured so that
you can successfully “
ping
”
X5368r-P3
. The default local IP
address is “192.168.1.1”.
Step 3:
Launch the Web browser (IE or Netscape), and enter the
default IP address 192.168.1.1 into the address bar to
access the Web management page.
Step 4: Click on the
System
link in the navigation bar and then on
the
Firmware Upgrade
link below it.
Step 5: Click on the
Browse
button to select the upgrade file.
Step 6: Click on the
Update
button when completed.
Note
: Strictly maintain stable power to
X5368r-P3
while upgrading its
software. If the power fails during the upgrading process, contents in
the memory could be destroyed, and the system may hang. In such a
case, you must call the dealer or system integrator for repairs.
X5368r-P3
User’s Manual Version 1.0
12
Chapter 2
Web Management Interface
I. Overview
The Web Management Interface is provided to let the configuration
of
X5368r-P3
as easily as possible. It provides a user-friendly
graphical interface through a Web platform. You can configure bridge
or router functions to accommodate your needs. In the section below,
each configuration item is described in detail.
II. Preparation
Step 1:
Please refer to the hardware installation procedure in
Chapter 1 to install
X5368r-P3
.
Step 2:
You should configure your PC to the same IP subnet
as the
X5368r-P3
.
Example:
X5368r-P3
: 192.168.
1.1
Your PC: 192.168.
1.x
Step 3:
Connect your PC to
X5368r-P3
and make sure that
the PING function is working properly. The default IP
address of this device is 192.168.1.1
Step 4:
Launch the Web browser (IE or Netscape), and enter
the default IP address 192.168.1.1 into the address
bar to access the Web management page.
Step 5:
The
Login
dialog box will appear first.
