background image

X5821 User’s Manual                                              Version 1.0 

 

VII. Management 

There are several ways that you can make the configuration: 

ƒ

 

Local Ethernet Port (telnet)

 – connect the Ethernet port to 

your local area network or directly to a PC, “telnet” 

X5821 

from any workstation in the LAN. The default local Ethernet 
IP address is “192.168.1.1”. See Chapter 2, Command Line 
Interface, for more details.   

ƒ

 

Local Ethernet Port (Web browser)

 – connect the Ethernet 

port to your local area network or directly to a PC. Launch 
your Web browser and enter default local Ethernet IP 
address “192.168.1.1” into the address bar. 

ƒ

 

ADSL Port from Remote Site

 – while the ADSL connection 

is in service and it is set to router mode, you may remotely 
“telnet” 

X5821 

from a workstation connected to the 

equipment. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

: As operating an ADSL device requires technical know-how and 

experience, it is recommended that only qualified technical staff manage 

X5821 

Therefore, a password authentication is required when you enter 

the command line and Web interface. See the 

Default Values

section to 

obtain the password. 

Summary of Contents for X5821




























































Reviews: