EG102 User’s Guide
22
LAN
Figure 22: LAN Configuration
To configure LAN:
Enter
the
IP address
which the CPE in the LAN will use to connect to the device.
For example, enter 192.168.1.1
Enter
the
Subnet Mask
. For example, enter 255.255.255.0
Check
to
enable UPnP
if necessary
Check
to
Enable IGMP Snooping
. This feature will snoop all of IGMP packets and
record related information. Therefore, multicast packets will be generated to the
related LAN ports only to avoid the packet flooding on all of LAN ports. Select
one of two modes,
Standard mode
or
Blocking mode
.
Select
to
Enable or Diable DHCP server
. If it is enabled, please enter the DHCP
IP pool of
Start IP address
and
End IP address
. Enter the value of
leased time
in
hour about the valid period of assigned IP address. The DHCP server ON
(enabled) feature will enable this device to assign IP address automatically to PC
in LAN if PC requests an IP address by DHCP client protocol.
