X7968r
User’s Guide
WDS Settings
WDS stands for Wireless Distribution System. It enables the access points (AP) to be
connected on wireless in the same channel to extend the coverage. You can either remove
an existing WDS functionality. To remove a WDS link to an AP, reset the MAC address
associated with the required port to 00:00:00:00:00:00 from web page.
Figure 24: Wireless Network – WDS Settings
Global Setting
Enable/Disable
the
Wireless Distribution System
(WDS) feature
Click
Apply
to enable this feature.
Select
WDS Port Setting
from 1 to 4 and enter the
MAC address
of wireless AP.
To remove the WDS to an AP, just enter the 00:00:00:00:00:00 in the MAC
address field to reset it.
Click
Confirm
to add this wireless AP.
28
