X8824r User’s Manual Version 1.0
87 / 102
55. Click on the
PPP
link in the
Routing
tab, and then click on the
Add
button to add a
PPPoA
configuration.
56. Select an interface name:
PPP-1
57. Select a protocol:
PPPoA
58. Default Route:
Enable
59. Security Protocol: Select
PAP
or
CHAP
60. Login Name: Enter
username
here (from ISP)
61. Password: Enter
password
here (from ISP)
62. Click on the
Submit
button to confirm the changes.
63. Click on the
Services
tab to view its sub-menu’s and configure
the
NAT
settings, then click on the
NAT
link below it.
X8824r User’s Manual Version 1.0
88 / 102
64. Select
NAT Rule Entry
from the NAT configuration drop down
list. Then click on the
Add
button to add a NAT entry.
65. Rule Flavor: Select a
Rule flavor
from the drop down list (Basic)
66. Rule ID:
Enter a number here
67. Local Address From:
Address from where this device will
receive IPs
68. Local Address to:
255.255.255.255 (broadcast) or other
69. Login Name: Enter
username
here (from ISP)
70. Global Address From:
Global
Address from where this device
will receive IPs
71. Global Address From:
Global
Address from where this device
will send its packets
72. Click on the
Submit
button to confirm the changes.
73. Click on the
Admin
tab to view its sub-menu’s and configure
the bridging settings, then click on the
Commit & Reboot
link
below it.