X8824r User’s Manual Version 1.0
11 / 102
Rear Panel
Label
Description
1
WAN
RJ-45 port; connect to a PC or LAN.
2
USB
USB port; connect to PC or LAN
3
RESET
Reset the modem back to factory settings by
holding down on this button.
4
ETHERNET RJ-11 or RJ-45 port; connect to the ADSL
outlet.
X8824r
uses RJ-11 Cable.
5
PWR
Power jack; connect to a power adapter.
4
3
2
1
5
X8824r User’s Manual Version 1.0
12 / 102
5. Hardware Installation
1. Connect one end of the ADSL cable to the WAN port of
X8824r
and the other end to the ADSL wall outlet.
2. Use a RJ-45 cable to connect one end to the Ethernet port of
X8824r,
and the other end to the LAN or a PC with an
Ethernet adapter installed.
3. Use a USB cable to connect one end to the USB port of
X8824r, and the other end to a PC with a USB port.
4. Plug in the AC adapter to the AC power socket, and then
connect the DC jack to the PWR inlet of
X8824r.
Note:
Be sure to use a RJ-45 crossover cable while connecting to a hub.
4
Power Supply
1
ADSL Outlet
2
PC
3
USB