XBLUE Networks
21
Extension User Guide
At
ten
dan
t Ad
ministr
ation
(Admin.
)
1
1.
SC. AL. DELAY - A sensor will activate every time the contact is opened. This means that
the sensor alarm will be activate several times, which may not be desirable. Therefore,
the delay, which is measured in minutes, will allow a preset time to pass before the
alarm sensor activates.
2.
SC. AL. Cancel - Like an alarm system the telephone system can alert internal or exter-
nal parties of an open sensor. The Security Alarm Cancel is a timer which allows the sit-
uation to be investigated before sending the alert notification. This timer is adjustable
from 0 (immediate) to 120 seconds. If the password is not enter in the correct time, the
system will begin the alert procedure.
3.
SC. AL. Period - This is the period of time that the internal extension will be alerted of
an open sensor. Any external numbers will continue until the notification is complete or
the Call Out Timer is reached (The Out Call Timer is set in the system administration
programming.
4.
SC. PSWD: 0000 - Sensor Control Password is used to reset an alarm sensor once is has
been activated.
Voice Mail Shutdown Procedure
The attendant is the only one who can shutdown the voice mail system. This procedure
must be done every time before powered down the telephone system.
1.
Press next (6 times) or until the voice mail shut down procedure screen is displayed or
Press back (once)
SHUT DOWN VM
back next show